How to setup tp link router

 A wireless router provides an easy way to connect to the LI-8100A wirelessly, using the LI-8100APP for iOS and Android OS devices, or Windows PC software on a computer. Many different brands of battery powered routers are suitable. We supplied the TP-LINK T-MR3040 (part number LI-COR 590-16299) with new LI-8100A tools. Other brands of wireless routers are also supported.

The router does not need an internet connection. Creates a wireless network (also known as a wireless access point) that enables communication between the device and the LI-8100A.

Note: Read all instruction manuals and quick start guides for your wireless router. TP - LINK TL - MR3040: http://www.tp-link.com/en/products/details/cat-4691_TL-MR3040.html

Install the charged battery in the router and turn it on. Verify that the Power LED is green or orange and is not blinking.

Set the mode switch on the TP - LINK side to the position labeled WISP or 3G / 4G.

Connect your computer to the router's network (make sure your computer has a dynamic IP address - it's called Obtain an IP address automatically in Windows®):

Or connect an RJ-45 Ethernet cable between your router and your computer,

Or connect to the wireless network. The network name (called the SSID) and the wireless password are printed under the TP-LINK battery cover.

Open a web browser and type 192.168.0.1 in the address bar, then press Enter.

log in. The default credentials are:

Username: Admin

Password: Admin

Click DHCP on the left of the configuration page. Consider the IP address range of the DHCP server and the default gateway. They are generally:

Starting IP address: 192.168.0.100

Ending IP address: 192.168.0.199

Default gateway: 192.168.0.1

If installed, remove the Cisco Systems wireless card located under the LI-8100A access panel.

Connect to the LI-8100A using a serial or USB connection, as described in First things first.

In the LI-8100A software, under 8100> Networks ... configure the wireless settings.

Set the IP address of the LI-8100A to be the same as the IP address of TP-LINK for the first three groups of numbers (as in 192.168.0) and outside the starting and ending range of the last group. Therefore, 192.168.0.200 is a suitable IP address for the LI-8100A.

IP address: 192.168.0.200

Netmask: 255.255.255.0 (must be the same on the router and the LI-8100A)

Gateway: 192.168.0.1 (must be the same on the router and on the LI-8100A)

Connection type: access point (infrastructure)

Leave encryption unchecked. Click Set to apply the settings.

Restart the LI-8100A.

Connect the router to the Ethernet port of the CompactFlash adapter on the bottom of the access panel.

Connect your iOS or Android device to the network created by TP-LINK.

The network name (called the SSID) and the wireless password are printed under the TP-LINK battery cover.

Launch the LI-8100APP and click Connect to Instrument.

Click New, enter the IP address of the LI-8100A (192.168.0.200) and save it.

Select the IP address and click Connect.

Once the connection is established, you can continue with your measurements. Other compatible wireless routers are configured similarly.

https://www.keyquery.com/router/how-to-setup-tp-link-router/